Ego FRM with gauge? [Archive]

FireFox

16-08-2007, 12:41

Having problems with the 'noid of my 06 and Eclipse is suggesting that the input pressure is too high. I was wondering if anyone had a FRM with gauge they could lend me so I could check to see what my input pressure actually is.

Thanks
S

tonedeaf

16-08-2007, 15:19

i have a 1200psi mini gauge but im assuming youll need a smaller one (0-300 or the 600)
i ordered mine from blackops (http://www.blackopsnz.com/inc/sdetail/1720) and it says they still have 3 in stock

stick

16-08-2007, 16:50

Your LPR screw should either be flush with the housing or a little in. You should need a guage for this.

What is the problem anyway?

FireFox

16-08-2007, 17:42

There is a vent hole in the back of the 'noid (the QEV end) that gas is just leaking out of.
Speaking with Nicky T this seems to be a designed 'over pressure valve' which degassing due to either the LPR or the inline being too high.
I was wondering if anyone had the FRM so I could actually have a logical testing rather than just buggering round with it.
I was going to have a serious attempt this weekend to see if I could get it working, failing that I will have to suck it up and get a new noid.

S